Questions & Answers

WORKING WELL AND STABLE (Out of the box, Smooth, Buttons Configured Correctly, Slight Issues) [Some of these emulators will need to be downloaded outside of the release for now, until the next update] {These updated emulators can be found here in the beta emulator section: http://bit.ly/2HtE77d}: At

So the new RS-97 Plus comes with this battery. With what battery to replace it?

HHHi guys, Hi Guys, I have an RS-97 version 3.0 and I have been trying to install RETROFW with no luck. I have tried different brand of micro sd and tried older version of RETROFW but always getting the same result. Obviously I am aware there are different versions dependingon the rs97 version, so I

I Have a Retrogame rg 300, really love the device but been having problems charging it. when I do it can take anything from 5 hours or more. The light on the back will start to flicker then go off then come back on again. So I never know when it's finished charging. I have tried different cables an

Hi! I have installes retrofw 2.0 in a mini arcademachine and i am not able to see preview images in the emulator. ¿Where should i place the images? Tx in advance

Hi guys. I bought a BLACK Retrogame300 from droixbox.co.uk and noticed when I play any game on fba a320 there was screen flickering as if there was a screen connection fault. I watched a few Utube videos and noticed the guys were using CPS2 on the same games and had no flicker. Low and behold I trie

Sería bueno poder contactar a personas de habla hispana y así expander el gran trabajo que se ha logrado con los cfw para cada consola, si alguien le interesa sería genial, en realidad soy nuevo en esto y estoy totalmente como un principiante

So I have.received my rg300 the newer snes style I have flashed a 32gb card with the custom fw but for the life me I cannot access the internal memory I have flashed 2 cards and no matter what I try I just cant access it. I have tried connecting the unit through 2 usb c cables my laptop wont recog

which firmware is better for the ldk handheld ? RetroFW 1.2 firmware or uselesss 1.6 firmware?

I am super interested in this console, but I'm a little wary because the main reason I want one is to play ROM hacks of Pokemon games. Things like Light Platinum, Pokemon Glazed, Pokemon Prism, etc. I know that these have had trouble on some GBA Flash carts in the past. Can anybody confirm that they

would the RS-07 be able to fit a 21700 or 26650 battery in it ?

Is there a yume nikki port for this? or could someone point me in the direction of how I would go about doing this?

How do you get Gngeo to run? Whenever I start it, I get a black screen then it resets back to the emulators screen. Do you need a NeoGeo bios to get it to run and if so, in what folder should it be?

Hi, my RS-97 is new V2.1. I installed the custom firmware using the internal micro SD card. I flashed the card with Firmware_v1.5_JZ4760B. I extended FAT32. The OS loaded but when I try to connect the usb to PC to add roms, it says "this device does not support usb mount". I am wondering how to add

Final Burn Alpha is great, but I have problems playing Toki. The only rom that seems fluid and playable is Toki Datsu bootleg (tokib.zip), but I can't insert coins (using "select") and start the game. What's the problem? The others roms, unfortunately, are too jerky to play. thanks

I purchased the last version before the upgraded dpad version. There is also now a dual boot version being sold as the Retroid Pocket. My question is can I flash that firmware on mine or is there another firmware out there that would work? I don't mind trying ones out as I have a backup of sd ca

Update : I solved the problem by increasing the ext4 partition from 500mb to 1gb (or greater). Open Dingux didn't have any free place on this partition to save files. I have installed cfw v1.5 but I cannot save games in any of the emulators. It just tells me "save failed".I have installed cfw v1

Hello, Can someone tell me how to activate the tv out functionality in RetroFW on the RG300 handheld (latest version). When the cable is inserted, no tv connection is detected and there is no pal / ntsc option present in the settings. Same behavior on the ldk landscape. Thanks Stephane

Please help me, after upgrading RG350 to v1.7, my device was rebooted constantly and the screen was black, I tried everything to fix it but it didn't work.

Hi all can anyone tell me if the GKD 350h is out yet and where can it be bought?

Checking Ali i noticed that there are RS-97 plus V3 where the screen dont have "the notch" (fm august 1). At present i have RS-97 plus V1 (with the glitching screen). So what's the difference? Also i noticed its posible to order with stock FW/ stock fw+OpenDingux/ retroFW.

I tried to flash the firmware onto a new 16gb sandisk micro sd and when I went to fire up my retrogame 300 with the newly flashed and partitioned sd card, it just goes into a black screen and stays there. Any information?

Hello! First of all, thank you all for the great effort put on the RS-97 custom firmware. I just received my RS-97 (2.1 new) and flashed the latest 1.5 custom firmware right away, however I'm experiencing screen flickering on some games and menus. I tried adjusting the CPU cycles (overclocking and u

Hallo, I have to change the Save Type in GBA Emulator on retrofirmware for playing dragonball Z on the LDK. But how can I do that I dont find it in the Emulator Menu. Thanks

Hello, My RS-07 came with rom names in chinese so I tried to download the original firmware for RS-07 with rom names in english from here but the link to mega is broken: https://jutleys.wixsite.com/retrogamers97-90/home/original-firmware-download-rs-97 Can anyone upload the stock original firmware

I have just added opendingux 1.2 to my newly acquired RS-97. I can connect it to Windows via USB and access the Rom storage (G:) on my sdcard. I have tried adding some roms to the Roms folder but the system seems unable to find them. When I try and browse I seem unable to find the Rom storage partit

I've installed Useless V1.6 on my V2.1(new) RS-97 and I can't get Picodrive to run MD roms, when I select an MD rom it crashes and I get a black screen, I then have to reset it to get it to reboot. Does anyone know how to fix it?

Are there any game gear emulators for the RS-97 yet? Its the only retro emulator im missing.

what would make a better speaker for the rs-07 ? The one it has is not as good quality as the rs - 97. I think the speaker is too low wattage because the volume gets loud but stops getting louder after turning it 1/4 of the way.

like the title says I am unable to extend the rom partition on the sd card after I write the 2.1 external custom firmware to it, I keep getting the error message that extending that partition is not supported, please help what do I do I have a 32GB card and yet my ROMs partition is limited to 2GB